How you create a mold of a piece in SW ?
This is the answer for a detailed tutorial for this question
-
Step 1:
1 - importing a step file format and click OK
-
Step 2:
2 - then click on Import Diagnostics
-
Step 3:
3 - and click on the correct surfaces
-
Step 4:
4 -And here is the piece with surfaces corrected
-
Step 5:
5 -is added after the window molding tools
-
Step 6:
6 - we begin our work by joint lines
-
Step 7:
7 - you select the aperture plane
-
Step 8:
8 -and click on analysis of body
-
Step 9:
9 -we note that there are more colors click on the stop which is between the two colors.
- click the right mouse button and select tangency -
Step 10:
10 -we note that lines joints are selected
-
Step 11:
11 -Here is the line of joints that is blue
-
Step 12:
12 -we click on the plane attached
-
Step 13:
13 -we set the plane of the joint in 36 mm
-
Step 14:
14 -click ok
-
Step 15:
15 -after we go to the last operation
(kernel - print) -
Step 16:
16 -click kernel - print
and click on the plane -
Step 17:
17 -after it will automatically insert a sketch
we draw a rectangle that must be below the plane of the joint -
Step 18:
18 - Click ok
-
Step 19:
19 - is taken as the dimensions of the image
-
Step 20:
20 - and here our mold is created
-
Step 21:
21 - we hide the parting
-
Step 22:
22 -moving the upper part
-
Step 23:
23 - a height of 60 mm
-
Step 24:
24 - After our piece on Chache
-
Step 25:
25 - This is our core - stamp
-
Step 26:
26 - you find the mold here to repeat the tutorial :
http://grabcad.com/library/kernel-print