Printing


Scale
This model is a 1:1 model and requires no scaling. Scaling this model will result in a poor or impossible fit of the induction charging pad.
Model Orientation
Rotate the model so that its right or left surface is parallel to the build plate. This ensures that the layers are built up evenly and reduces the need for extensive support.
Support
While printing on its side reduces the need for support, you may still want some. Most slicing software offers automatic support generation, which seems to be adequate with no modification.
Step 1: Print
Print at with desired layer height and infill.
Step 2: Remove supports
Manually remove all support material.
Step 3: Install Charge pad
Install the Mophie 7.5W Wireless Charge Pad into the center of the stand by passing the transformer through the clearance in the center of the stand and pressing the edges of the pad firmly into the pocket.
Charger used:
https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=https://www.amazon.com/mophie-Wireless-Charge-Optimized-Technology/dp/B075M4ZH17&ved=2ahUKEwid-4HUgPKFAxUbMjQIHWsTCDoQFnoECAgQAQ&usg=AOvVaw2zMQSX7OK70p2PY2wbvZly