Tutorials

  • clearance ×

Some concepts about DIN 5480 spline dimension Part 1

Carlos Soler
in Dimensioning / Tolerancing
42 9 Expert
For some questions that I received. I will upload some tutorials about DIN 5480 dimensions. This is a tutorial explaining some concepts on dimensions of the splines ruled by DIN 5480
SOLIDWORKS clearance tolerance reference diameter dimension din 5480

How to FDM Print for Part Sliding Clearance

GrabCAD Tutorials
in Assemblies
13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!
GrabCAD Print sliding clearance printing 3d fdm

Tutorials:-Working with Power MILL "PART IV" Finish Machining Strategies.

Sourbh
in Design & CAD
4 0 Intermediate
Finishing strategies machine the actual component form and where applicable, follow on from the Area Clearance operation. Suitable values are required to control the accuracy and amount of excess material to be left on a component by a tool path. The parameters used for this purpose are called Thickness and Tolerance
Powermill suman sourbh powermill clearance tutorials educational cam power area 3d mill engineering

Tutorials:-Working with Power MILL "PART IV" Finish Machining Strategies.

Sourbh
in Design & CAD
2 0 Intermediate
Raster, Radial, Spiral, and Pattern Finishing. Introduction. This section will cover Finishing strategies created by the downward projection of a Pattern, which include four types, Raster, Radial, Spiral and (user defined) Pattern. PowerMILL generates the toolpaths by projecting a wireframe form down the Z-axis onto the model. The standard patterns applied in Raster, Radial, and Spiral are achieved by entering values directly into the Finishing Form. The resultant Pattern can be displayed by selecting Preview before executing the command by selecting Apply. The Pattern option requires a user-defined geometric form (active Pattern), which is projected down Z onto the model as a tool path.
Powermill suman sourbh powermill clearance tutorials educational cam power area 3d mill engineering

Tutorials:-Working with Power MILL "PART III" 3D Area Clearance.

Sourbh
in Design & CAD
2 0 Beginner
next here
Powermill engineering mill 3d area power cam educational tutorials clearance sourbh

Solidworks interference & clearance detection

Ahmed Sakib
in Modeling
1 0 Intermediate
How to check clearance b/w parts in Solidworks and also check interference b/w parts using Solidworks Interference detection tool.
SOLIDWORKS clearance interference dectection soldiworks

CATIA V5 - Check Clashes, Clearances and Contact

3D Comparison
in Modeling
1 0 Beginner
The case study model can be found at: https://grabcad.com/library/gopro-karma-drone-complete-with-camera-1 To check for clashes, clearances, and contact in CATIA V5, you can use the **Check Clash** tool. This tool can be found in the **Analyze** menu.
CATIA tool study analysis contact clearance clashes catia

How to build complete process assemblies

GrabCAD Tutorials
in Design & CAD
0 0 Intermediate
1. OPTIONS 1.1. Orienting Parts for Assemblies Before making design alterations it is important to have a strategy for the build orientation. Orientation of the mating components can affect the fit of the assembly and will determine the necessary clearances.
Other printing 3d clearance orienting fdm assemblies assembly

JP_005_GrabCAD Print: 部品摺動部の隙間をＦＤＭ造形する方法

Stratasys Japan
in Assemblies
0 0 Intermediate
造形後にはめ合わせるまたは摺動（スライド）させる必要がある部品を3D造形する場合、CADシステムで該当する部品の間にある程度の隙間を設ける必要があります。目安として、造形する際の積層ピッチの2倍の隙間から始めるとよいでしょう。ただし、小さいサイズで何度かテスト造形を行い、積層ピッチの2倍の法則が特定の状況や向きに当てはまるかを確認することをお勧めします。それでは3Dプリンタで楽しくモノづくりをしていきましょう！
GrabCAD Print fdm 3d printing clearance sliding

Tutorials:-Working with Power MILL "PART III" 3D Area Clearance.

Sourbh
in Design & CAD
0 0 Beginner
Hi Guys, Am back with new Tutorials for CAM work in power mill. In this part you will Learn the Different Strategies for Material Removal/3d Area Clearance. Thanks and Enjoy...!!
Powermill engineering mill 3d area power cam educational tutorials clearance sourbh
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.