Models
Work experience
Internee
Compcept Solution
•
June 2023 - September 2023
I worked on Design and Fabrication of Motor's test bench using hardware in the Loop concept, the output of the motors (R.P.M) was controlled by the Matlab which was connected with a Microcontroller ESP-32 C-6. the ESP 32 was used for reading parameters of the motors such as RPM. Temperature and Current and Voltage and based on the RPM readings the MATLAB controlled the motors if their speed was above certain value i.e 1100 RPMs.
Internee
Mechatronix solutions
•
June 2022 - August 2022
Worked as internee on design of flap barriers, walkthrough gates and security equipment.
Education
AIR UNIVERSITY ISLAMABAD
Bachelors , MECHATRONICS ENGINEERING
•
January 2020 - January 2024
Acquired the following skills:
> 3D modeling Auto cad and Solid works
> PCB design and Fabrication
> System Integration and Diagnosis
> PLC programming ( Allen Bradely)
