James Doglio

I am a 3D Printing Hobbyist and solid model designer

6

followers

Kirtland, United States

Models

Sort by: Most downloaded
8 Inch Folding Bracket
Not sure who made this I bought it on Amazon and there was no manufacturer identified in the ad or on the packaging.
27 1024 4
WAGO 221-2401
WAGO 21-2401 Connector. Outside dimensions are accurate. Rest for illustration purposes only.
8 468 0
Kasa Pan and Tilt WiFi Camera
I use these cameras to monitor my 3D Printers. I modeled this so I could use it in my design work for the mounts on the printers.
7 298 0
E3D V6 1.75mm Collar Mount Revo
This is a E3D V6 collar mount hot end.
5 220 0
Gas Can Replacement Cap
For Replacing a broken or missing plastic gas can cap
4 122 0
Bracket
I made this to support a 1/4" rod filled with spools of wire. You can use it as is, or modify it, and use it for whatever you want. This is a rem...
2 83 0
Hinges For Prusa enXLosure
I built This enclosure for my XL using this model https://www.printables.com/model/610843-enxlosure-minimalist-and-printable-prusa-xl-enclos From V...
12 80 2
TrippLite Model NO42AB-006-IVM
Tripp-Lite 6 Port Wall Plate
3 79 0
iPhone 7/Generic Phone Stand
I made this for my wifes iPhone 7. I probably could have bought one cheaper but it came out pretty nice
3 67 0
Douper Toy Box Hinge
I modeled this hinge for a project. Posting it here in case any else needs it. It is dimensionally accurate.
3 57 0
Bud Industries NBB 22253
Update 11/15/21 Discovered original box was about 10mm too deep. Now it. is the correct depth. Update 11/8/21 Added interior frame that sits at...
1 49 0
Modified Makerbot Replicator Z18 Z Upgrade to E3DV6 Revo Voron and Open Source
Created for Modification Purposes I am converting a Replicator Z18 to a Open Source Printer using a Revo Voron Hot end and SKR Octopus Electronics...
6 42 6
Customized 2 Gang Switch Plate
I installed motion sensor switches on my stairway and needed custom switch plates to direct or limit the sensors ability to pick up movement. I al...
3 38 0
E3D Revo Wrench - For Upgrade Only Do Not Use As Is
I probably shout delete this model. It really does not work too well. It needs a metal insert at it melts when you try to use it. I am leaving i...
1 37 0
12V 1.2GPM Pump Stand With Pump and Battery Models Included
I need a small 12V pump recently and I bought this one off of Amazon. I bought a UPS battery to power it. I then needed a stand to be able to use...
1 35 0
Prusa XL Enclosure With 8" LED Light
I wanted mor light in mu XL Enclosure. I cut an opening in the enclosure top and installed an 8" LED fixture. I added a Kasa HS200 WiFi switch an...
3 27 2
2.5" Plain but Decorative Pipe Flange
I created this to help a friend out doing some remodeling.
1 26 0
Heat Set Insert Tool Storage Rack
I needed a rack to organize my heat set insert tool so it would better fit into my tool box. To that end I designed this storage rack.
5 25 0
NASA Meatball Printed in 8 pieces 22" Diameter
This is a NASA Meatball Logo I designed in Fusion 360 and printed on my 5 head Prusa XL. I used the NASA style manual and specifications to make i...
1 24 0
Camera Mount to Fit Cup Holder hole on the rear deck of my boat
I wanted to add a wireless rear view camera to the back of my boat for trailering and for operation in the water. I removed a cup holder on my swi...
0 20 1
Tool Hanger for Voron 2r4
I wanted a place to store my putty knife, nippers, and plastic razor knife. So, I designed and built this hanger. BTW, if you don't have a plasti...
4 18 0
Presto Griddle Spreader
If you own this Presto Griddle you know that the feet are designed to spread apart so grease will drain off the griddle. You also know that after ...
1 16 4
Voron 2.4r2 Skirt With Hour Meter
I modified the front left skirt on my Voron so I could add an hour meter. The hour meter can be found here. https://www.amazon.com/gp/product/B...
0 15 0
NASA Worm1220mm X 340mm 4 Pieces with Mounting Template
I designed this for my daughter in law that works at NASA. I mounted it magnectically on a magnetic white board that is 50"in long and 40" high. ...
1 11 0
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.