Learn about the GrabCAD Platform
Get to know GrabCAD as an open software platform for Additive Manufacturing
Visit our new homepage
Hi, time ago I ended the modeling with Blender, of the awesome Whitehall rowing boat 14ft , in the link below, in addition the classic formats that I usually share you can finding, some common NURBS formats, that I've generated from what I have exported from FreeShip, in fact this time you can also enjoy the following file types: STEP, 3dm,. IGES,. gCAD,. fcstd. Now added also the printable file thanks to another user of GrabCAD, this user 7027
https://en.wikipedia.org/wiki/Whitehall_rowboat
Hydrostatic Results
Design length : 4.244 m
Length over all : 4.244 m
Design beam : 1.146 m
Beam over all : 1.146 m
Design draft : 0.178 m
Midship location : 2.122 m
Water density : 1.025 t/m^3
Appendage coefficient : 1.0000
Volume properties:
Displaced volume : 0.204 m^3
Displacement : 0.209 tonnes
Total length of submerged body : 4.014 m
Total beam of submerged body : 0.994 m
Block coefficient : 0.2872
Prismatic coefficient : 0.4807
Vert. prismatic coefficient : 0.5093
Wetted surface area : 2.878 m^2
Longitudinal center of buoyancy : 2.131 m
Longitudinal center of buoyancy : -0.778 %
Transverse center of buoyancy : 0.000 m
Vertical center of buoyancy : 0.123 m
Midship properties:
Midship section area : 0.106 m^2
Midship coefficient : 0.5976
Waterplane properties:
Length on waterline : 4.014 m
Beam on waterline : 0.994 m
Waterplane area : 2.251 m^2
Waterplane coefficient : 0.5640
Waterplane center of floatation : 2.108 m
Y coordinate of DWL area CoG : 0.000 m
Half entrance angle of DWL : 13.255 degr
Transverse moment of inertia : 0.129 m^4
Longitudinal moment of inertia : 1.335 m^4
Initial stability:
Vertical of transverse metacenter : ...
Very good work ! Please have you the freeship file available ?
is shared inside the folder, the extension is fbm!
many thanks again for your quick reply !
Good work, thank you very much.
Added a 3D model tha I have courtesy from an other user of GrabCad, this one is printable, many thanks to this man, read the description to find him profile.
Great this wil look good ,on the sloop Emma by Gary Webb
Hi! excellent shape and lines. Do you have some information about the internal bilges/bulkheads/beams? Thank you
Sorry no, this is only the linesplan but from that you can extrapolate a various information such as bilges bulkheads
A 3D printed model of the Whitehall 14 based on your model. It’s double skinned so the printer could spiral print it. The print took about 5.5hrs
Fantastic, it seems to me very well printed, I also saw the 3D print that you published in the group, I think you are very good, but I understand, that lofting was not easy with all those sections, with the subdivision everything is smoother, but you have a lot of other problems ..