Tutorials

  • Dimensioning / Tolerancing ×
  • FEM ×
  • Standards ×

Fatigue Crack Growth Analysis of Modified Compact-Tension Specimen - ANSYS Workbench

Semih Tinmaz
in FEM
48 11 Intermediate
This tutorial includes step-by-step fatigue crack analysis of Modified Compact-Tension Specimen.
spaceclaim computer aided engineering finite element analysis fracture mechanics paris law ansys workbench fatigue crack fatigue life

Some concepts about DIN 5480 spline dimension Part 1

Carlos Soler
in Dimensioning / Tolerancing
42 9 Expert
For some questions that I received. I will upload some tutorials about DIN 5480 dimensions. This is a tutorial explaining some concepts on dimensions of the splines ruled by DIN 5480
SOLIDWORKS clearance tolerance reference diameter dimension din 5480

Spur Gear Set - Stress Evaluation

Semih Tinmaz
in FEM
36 0 Beginner
Spur gears have their teeth cut parallel to the axis of the shaft on which the gears are mounted, transmitting power between the parallel shafts. To maintain a constant angular velocity ratio, two meshing gears must satisfy a fundamental law of gearing: the shape of the teeth must be such that the common normal at the point of contact between two teeth must always pass through a fixed point on the line of centers. The contact point is called the pitch point. The goal is to assess the maximum stress during the transmission of the torque. By engineering judgement, the maximum stress occurs either at a contact point or at the root of a tooth due to the bending of the tooth. Since there is no restriction of deformation in the depth direction, i.e.,the gears are free to expand (or contract) in the depth direction, so it is modeled as a plane stress problem.
ansys workbench stress analysis transmission gears gear finite element analysis

Side Pole Test - High Speed Impact - Explicit Dynamics - ANSYS Workbench

Semih Tinmaz
in FEM
32 0 Intermediate
Explicit dynamics is a time integration method used to perform dynamic simulations when speed is important. Explicit dynamics account for quickly changing conditions or discontinuous events, such as free falls, high-speed impacts, and applied loads. Because these “nonlinear dynamics” are integrated into the simulation, explicit dynamics is the preferred choice for simulating highly transient physical phenomena. Some side impacts involve a vehicle travelling sideways into rigid roadside objects such as trees or poles. Often this is the result of a loss of control on the part of the driver, owing to speeding, misjudgement of a corner or because of a skid in slippery conditions.
high-speed impact impact finite element analysis explicit dynamics ansys workbench side pole test crash test

DIN 580

Ivo Jardim
in Standards
32 1 Expert
Suspension Bolt
bolt 580 din

Planar Seal Simulation with Hyperelastic Experimental Data (Mooney-Rivlin Hyperelastic Model)

Semih Tinmaz
in FEM
28 0 Intermediate
The seal which is used in the door of applications from automotive industries. The seal is a long strip of rubber and it will be modeled as a plane strain problem. A series of material tests has been conducted, including the uni-axial tensile test, the bi-axial tensile test and the shear test. A series of trials of data fitting shows that, for these material testing data, the two-parameter "Mooney-Rivlin Hyperelastic Model" fits the data better than other models. It is decided to use Two-Parameter Mooney-Rivlin Model. The unit system used in this tutorial is "U.S. Customary (in-lbm-lbf-s)".
finite element analysis ansys workbench mooney-rivlin model planar seal test hyperelasticity

Some concepts about DIN 5480 spline dimension Part 3

Carlos Soler
in Dimensioning / Tolerancing
24 0 Expert
In this tutorial, I will explain the concept of addendum correction (modification) and how is applied to DIN 5480 splines
SOLIDWORKS joint connection gear modification correctio addendum 5480 din

Static Crack Growth Analysis of ARCAN Specimen - ANSYS Workbench

Semih Tinmaz
in FEM
23 0 Intermediate
This tutorial includes step-by-step static crack growth analysis of ARCAN Specimen.
ansys workbench fatigue life fatigue crack fracture mechanics finite element analysis computer aided engineering spaceclaim

Topology Optimization of Triangular Bracket - ANSYS Workbench

Semih Tinmaz
in FEM
23 1 Intermediate
Topology optimization is a mathematical method which spatially optimizes the distribution of material within a defined domain, by fulfilling given constraints previously established and minimizing a predefined cost function. Main aim of this tutorial is optimizing and decreasing the material density of the triangular bracket as 50% by topology optimization.
ansys workbench ansys spaceclaim topology optimization topology

GD&T essential for engineering

tony wang
in Dimensioning / Tolerancing
22 1 Beginner
GD&T is essential for engineering projects, GD&T tell engineers how reasonable and feasibility to realize the thing imagined.
CATIA iso1101 y14-5 asme up stack tolerance gd-t

Introduction to Finite Element Method /CAE

Prasertsak Naksakul
in FEM
18 0 Beginner
Finite Element Method for product design and process improvement.
fluid improvement process cae analysis stress design fem

AutoCAD | Working with layout view

Resa Ant
in Dimensioning / Tolerancing
15 1 Intermediate
In this tutorial video, you can treat your layout as a sheet of paper upon which you can arrange the parts of your drawing systematically, as well as add annotations and other details before creating the final output.
AutoCAD annotation dimensioning drawing detail 3d autocad view layout

Spring stiffness calculation in SOLIDWORKS

Ahmed Sakib
in FEM
14 1 Intermediate
How to calculate spring stiffness with Solidworks simulation @cadingal . Static structural analysis of a helicoil spring will be done using self contact approach to calculate spring stiffness in Solidworks.
finite element analysis fem solidworks spring stiffness calculation spring stiffness simulation

Some concepts about DIN 5480 spline dimension Part 2

Carlos Soler
in Dimensioning / Tolerancing
14 3 Expert
Continuation of part 1. https://grabcad.com/tutorials/some-concepts-about-din-5480-spline-dimension-part-1
SOLIDWORKS teeth dimension 5480 din

Linear Static Study in 10 simple steps.

Ilirjan Leci
in FEM
14 0 Intermediate
Linear Static Study with SolidEdge.
fea solidedge
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.