Tutorials

  • Drafting ×
  • Simulation & CAE ×
  • Kinematics ×
  • Other ×

Cap screws and machine screws

dea
in Drafting
67 12 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.
Autodesk Inventor screw cap

Fatigue Crack Growth Analysis of Modified Compact-Tension Specimen - ANSYS Workbench

Semih Tinmaz
in FEM
59 14 Intermediate
This tutorial includes step-by-step fatigue crack analysis of Modified Compact-Tension Specimen.
spaceclaim computer aided engineering finite element analysis fracture mechanics paris law ansys workbench fatigue crack fatigue life

Side Pole Test - High Speed Impact - Explicit Dynamics - ANSYS Workbench

Semih Tinmaz
in FEM
40 0 Intermediate
Explicit dynamics is a time integration method used to perform dynamic simulations when speed is important. Explicit dynamics account for quickly changing conditions or discontinuous events, such as free falls, high-speed impacts, and applied loads. Because these “nonlinear dynamics” are integrated into the simulation, explicit dynamics is the preferred choice for simulating highly transient physical phenomena. Some side impacts involve a vehicle travelling sideways into rigid roadside objects such as trees or poles. Often this is the result of a loss of control on the part of the driver, owing to speeding, misjudgement of a corner or because of a skid in slippery conditions.
high-speed impact impact finite element analysis explicit dynamics ansys workbench side pole test crash test

Planar Seal Simulation with Hyperelastic Experimental Data (Mooney-Rivlin Hyperelastic Model)

Semih Tinmaz
in FEM
35 0 Intermediate
The seal which is used in the door of applications from automotive industries. The seal is a long strip of rubber and it will be modeled as a plane strain problem. A series of material tests has been conducted, including the uni-axial tensile test, the bi-axial tensile test and the shear test. A series of trials of data fitting shows that, for these material testing data, the two-parameter "Mooney-Rivlin Hyperelastic Model" fits the data better than other models. It is decided to use Two-Parameter Mooney-Rivlin Model. The unit system used in this tutorial is "U.S. Customary (in-lbm-lbf-s)".
finite element analysis ansys workbench mooney-rivlin model planar seal test hyperelasticity

How to save your animations as GIFs in SolidWorks

Yahya T Khedr
in Other
33 3 Intermediate
Do you want to know how to make GIFs of your animations? Ever asked yourself how they did it? Here I'll show you how to make seamless GIFs from your animations using SolidWorks, as well as PhotoScape... I chose PhotoScape as it has decent results, doesn't cause any bumping & - most important - is for free. You can download the latest version from here: http://www.photoscape.org/ps/main/download.php
animation render software photoscape rendering photoview gif solidworks

Topology Optimization of Triangular Bracket - ANSYS Workbench

Semih Tinmaz
in FEM
32 2 Intermediate
Topology optimization is a mathematical method which spatially optimizes the distribution of material within a defined domain, by fulfilling given constraints previously established and minimizing a predefined cost function. Main aim of this tutorial is optimizing and decreasing the material density of the triangular bracket as 50% by topology optimization.
ansys workbench ansys spaceclaim topology optimization topology

Static Crack Growth Analysis of ARCAN Specimen - ANSYS Workbench

Semih Tinmaz
in FEM
30 0 Intermediate
This tutorial includes step-by-step static crack growth analysis of ARCAN Specimen.
ansys workbench fatigue life fatigue crack fracture mechanics finite element analysis computer aided engineering spaceclaim

Industrial/steampunk lamp with 3D printed parts

Dape
in Other
27 4 Intermediate
Industrial/steampunk lamp with 3D printed parts
airbrush vintage printing 3d project lamp steampunk industrial

Solidworks Tutorial # 236 How to Design a Industrials Bin in Sheet Metal by SW Easy Design

Praveen Kumar
in Drafting
24 0 Intermediate
M.K. Engineering Workshop GST : 09BETPM3972F1ZW Please any Manufacturing requirement in Rice Mill, Floor Mill, Dall Mill, any Related Product. Design By- Praveen Kumar-Email ID- acadone.edu@gmail.com Note- All Model is a Basic Model But Our Workshop Make a Fully Define Model..... if You interested our model then Contact me by Mail.... We Provide SolidWorks, Auto-CAD,(Mechanical Drawing 3D Design,Catia V5......etc Software Free Tutorials. You can subscribe our channel to get more information. Solidworks Easy Design Channel: Tutorials for SolidWorks on many levels and subjects Covering most of the SolidWorks fields - SolidWorks Features - SolidWorks for Beginners - SolidWorks Advanced - SolidWorks Simulation - Art & Design - etc
SOLIDWORKS sheet metal solidworks

Motion Study oF Differential in Solidworks

Vatan Gedam
in Other
21 0 Intermediate
Here we apply rotation to find out the transmission
video study motion animation differential

Spring stiffness calculation in SOLIDWORKS

Ahmed Sakib
in FEM
14 1 Intermediate
How to calculate spring stiffness with Solidworks simulation @cadingal . Static structural analysis of a helicoil spring will be done using self contact approach to calculate spring stiffness in Solidworks.
finite element analysis fem solidworks spring stiffness calculation spring stiffness simulation

Linear Static Study in 10 simple steps.

Ilirjan Leci
in FEM
14 0 Intermediate
Linear Static Study with SolidEdge.
fea solidedge

Activate SolidWorks 2017 RealView Graphics on an Intel CPU

Danny Bichard Design
in Other
14 13 Intermediate
Activate RealView Graphics on an unrecognised Intel graphics card, e.g. my Intel(R) HD Graphics 620 card on my Lenovo IdeaPad 320 laptop.
cpu 620 card graphics intel realhack realview solidworks

Convert image to DXF in 5 minutes

Ali Nasser
in Drafting
13 2 Intermediate
Convert image to DXF in 5 minutes Jpg to DXF PNG to DXF SVG to DXF BMP to DXF PDF to DXF PSD to DXF Laser DXF Plasma DXF Waterjet DXF Adobe Illustrator DXF Autocad DXF Sheet metal DXF
AutoCAD plasma laser psd bmp png svg jpg dxf image convert

Simulation of Two Flanges with Bolts

zaher
in FEM
13 10 Intermediate
Solidworks Simulation, Bolt connection
solidworks flanges bolt_connection simulatiom
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.