Tutorials

  • Simulation & CAE ×
  • Kinematics ×
  • Process ×

Fatigue Crack Growth Analysis of Modified Compact-Tension Specimen - ANSYS Workbench

Semih Tinmaz
in FEM
59 14 Intermediate
This tutorial includes step-by-step fatigue crack analysis of Modified Compact-Tension Specimen.
spaceclaim computer aided engineering finite element analysis fracture mechanics paris law ansys workbench fatigue crack fatigue life

I Built a Military Robot

Engineering Juice
in Process
45 6 Intermediate
Mobile, military robot optimized for use in desert environments which can be controlled remotely or autonomously and can collect/ stream video to a VR headset via its front mounted camera. The method of movement is a continuous track, created using steel roller chain connected by fasteners with 3D printed links. These loops sit on a custom designed drive sprocket and idler sprocket with 4 shock absorber loaded roller pins that act as the suspension system. The drive motors are powered by '18650' batteries, directed by a raspberry pi 4 and connected to a motor controller. For connectivity, a mobile device can connect to the pi's external antenna as it is a WiFi access point. From here, directions can be sent to the robot from the mobile device using the Node Red GUI and additionally, the entirety of the main raspberry pi computer can be accessed for the use of sending custom commands for autonomous movement.
Fusion 360 printed 3d rc programming pi raspberry electronics 360 fusion robot robotics

Side Pole Test - High Speed Impact - Explicit Dynamics - ANSYS Workbench

Semih Tinmaz
in FEM
40 0 Intermediate
Explicit dynamics is a time integration method used to perform dynamic simulations when speed is important. Explicit dynamics account for quickly changing conditions or discontinuous events, such as free falls, high-speed impacts, and applied loads. Because these “nonlinear dynamics” are integrated into the simulation, explicit dynamics is the preferred choice for simulating highly transient physical phenomena. Some side impacts involve a vehicle travelling sideways into rigid roadside objects such as trees or poles. Often this is the result of a loss of control on the part of the driver, owing to speeding, misjudgement of a corner or because of a skid in slippery conditions.
high-speed impact impact finite element analysis explicit dynamics ansys workbench side pole test crash test

Planar Seal Simulation with Hyperelastic Experimental Data (Mooney-Rivlin Hyperelastic Model)

Semih Tinmaz
in FEM
35 0 Intermediate
The seal which is used in the door of applications from automotive industries. The seal is a long strip of rubber and it will be modeled as a plane strain problem. A series of material tests has been conducted, including the uni-axial tensile test, the bi-axial tensile test and the shear test. A series of trials of data fitting shows that, for these material testing data, the two-parameter "Mooney-Rivlin Hyperelastic Model" fits the data better than other models. It is decided to use Two-Parameter Mooney-Rivlin Model. The unit system used in this tutorial is "U.S. Customary (in-lbm-lbf-s)".
finite element analysis ansys workbench mooney-rivlin model planar seal test hyperelasticity

Topology Optimization of Triangular Bracket - ANSYS Workbench

Semih Tinmaz
in FEM
32 2 Intermediate
Topology optimization is a mathematical method which spatially optimizes the distribution of material within a defined domain, by fulfilling given constraints previously established and minimizing a predefined cost function. Main aim of this tutorial is optimizing and decreasing the material density of the triangular bracket as 50% by topology optimization.
ansys workbench ansys spaceclaim topology optimization topology

Static Crack Growth Analysis of ARCAN Specimen - ANSYS Workbench

Semih Tinmaz
in FEM
30 0 Intermediate
This tutorial includes step-by-step static crack growth analysis of ARCAN Specimen.
ansys workbench fatigue life fatigue crack fracture mechanics finite element analysis computer aided engineering spaceclaim

How to design Complete Robot using Voice Assistant like JARVIS in Fusion 360

Rugved Chavan
in Process
17 1 Intermediate
4-wheeled Robot Design Frame is 3D printable. Components - 1. Raspberry pi 4 2. Sony WebCam 3. Normal 3.5 mm jack Speaker 4. Custom Frame 5. MI 20000 mAh powerbank 6. 100 RPM Dual Shaft BO Motor - Straight with wheels Custom Voice Assistance code is running in background. Voice assistance code is connected with database which is having values like quantity and dimensions of components. Mail me for Jarvis source code. Like this video... 🤘
Fusion 360 automation electronics robots arduino engineering technology robot robotics

Spring stiffness calculation in SOLIDWORKS

Ahmed Sakib
in FEM
14 1 Intermediate
How to calculate spring stiffness with Solidworks simulation @cadingal . Static structural analysis of a helicoil spring will be done using self contact approach to calculate spring stiffness in Solidworks.
finite element analysis fem solidworks spring stiffness calculation spring stiffness simulation

Linear Static Study in 10 simple steps.

Ilirjan Leci
in FEM
14 0 Intermediate
Linear Static Study with SolidEdge.
fea solidedge

Simulation of Two Flanges with Bolts

zaher
in FEM
13 10 Intermediate
Solidworks Simulation, Bolt connection
solidworks flanges bolt_connection simulatiom

[VIDEO] Several Ansys Fluent and CFX CFD tutorials

S. B.
in CFD
11 1 Intermediate
How to achieve 2D and 3D CFD simulations with commerical CFD software ? This tutorial shows how to simulate different task with fluent and cfx If you like this, please sucribe my Youtube channel !
tutorials fluent cfx cfd

Flow in diffuser (Fluid-Flow CFX) ANSYS

Mukesh Ch Joshi
in CFD
10 1 Intermediate
in this video i am going to tell you how to make "Flow in diffuser (Fluid-Flow CFX) ANSYS". you can check it out in YouTube by clicking here :- https://youtu.be/a5nawFGT8Fs Also you can visit my detailed blog on this topic :- https://www.mechprof.com/2020/06/flow-in-diffuser-fluid-flow-cfx-ansys.html
flow diffuser ansys cfd

How to do Structural Analysis of a Car Wheel in SOLIDWORKS?

Ahmed Sakib
in FEM
10 0 Intermediate
How to do Structural Analysis of a Car Wheel in SOLIDWORKS? @cadingal Learn..... How to assign gravity load? How to assign Force load? How to evaluate stress, deformation & factor of safety?
car wheel analysis fea car wheel solidworks simulations car wheel simulation car wheel fea

External Windmill flow simulation in solidworks fully explained for beginners from scratch

Amit Mourya
in FEM
10 0 Intermediate
In this video you are going to learn how to do external flow simulation in solidworks. i have defined and make everything from scratch like making geometry explaining why i am doing a particular step etc. i have also explained how to define boundry conditions in solidworks . what is mean by reference of axis . how to do wind flow simulation in solidworks with deep explaination i hope this video helps you a lot . I also define how to use equation goal . if you want to learn about more flow simulation in solidworks checkout this playlist https://www.youtube.com/playlist?list=PLjExndY7KnkBnQ6LS2u9ZfjOMOVGFIfxI and if possible support us on paypal so that we can create more and better content : paypal.me/nobodyknow137
turbine wind conditions boundary aerodynamic graph plot how tutorial solidworks simulation flow external

How to do a Basic Linear Finite Element Analysis in CATIA V5

Pedro José Silva Campos
in Simulation & CAE
10 2 Intermediate
After this tutorial, hopefully you will be able to do a simple linear analysis using FEM (Finite Element Method). The steps are straight forward and the part used is available in my profile (foot peg - ATV). The idea behind this is seeing how it reacts to a Pressure of 125 KPa. All the units in this tutorials are in the IS (International System) but i will put the conversions Metric-Imperial. IF YOU HAVE ANY DOUBTS SUCH AS WHERE ARE THE COMMANDS LOCATED DON'T HESITATE TO CONTACT ME. Pedro José Silva Campos
mises von atv element finite catia catiav5 mesh fem
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.