Tutorials

  • Simulation & CAE ×
  • Process Simulation ×

Fatigue Crack Growth Analysis of Modified Compact-Tension Specimen - ANSYS Workbench

Semih Tinmaz
in FEM
79 14 Intermediate
This tutorial includes step-by-step fatigue crack analysis of Modified Compact-Tension Specimen.
spaceclaim computer aided engineering finite element analysis fracture mechanics paris law ansys workbench fatigue crack fatigue life

Spur Gear Set - Stress Evaluation

Semih Tinmaz
in FEM
55 0 Beginner
Spur gears have their teeth cut parallel to the axis of the shaft on which the gears are mounted, transmitting power between the parallel shafts. To maintain a constant angular velocity ratio, two meshing gears must satisfy a fundamental law of gearing: the shape of the teeth must be such that the common normal at the point of contact between two teeth must always pass through a fixed point on the line of centers. The contact point is called the pitch point. The goal is to assess the maximum stress during the transmission of the torque. By engineering judgement, the maximum stress occurs either at a contact point or at the root of a tooth due to the bending of the tooth. Since there is no restriction of deformation in the depth direction, i.e.,the gears are free to expand (or contract) in the depth direction, so it is modeled as a plane stress problem.
ansys workbench stress analysis transmission gears gear finite element analysis

Side Pole Test - High Speed Impact - Explicit Dynamics - ANSYS Workbench

Semih Tinmaz
in FEM
51 0 Intermediate
Explicit dynamics is a time integration method used to perform dynamic simulations when speed is important. Explicit dynamics account for quickly changing conditions or discontinuous events, such as free falls, high-speed impacts, and applied loads. Because these “nonlinear dynamics” are integrated into the simulation, explicit dynamics is the preferred choice for simulating highly transient physical phenomena. Some side impacts involve a vehicle travelling sideways into rigid roadside objects such as trees or poles. Often this is the result of a loss of control on the part of the driver, owing to speeding, misjudgement of a corner or because of a skid in slippery conditions.
high-speed impact impact finite element analysis explicit dynamics ansys workbench side pole test crash test

Topology Optimization of Triangular Bracket - ANSYS Workbench

Semih Tinmaz
in FEM
50 2 Intermediate
Topology optimization is a mathematical method which spatially optimizes the distribution of material within a defined domain, by fulfilling given constraints previously established and minimizing a predefined cost function. Main aim of this tutorial is optimizing and decreasing the material density of the triangular bracket as 50% by topology optimization.
ansys workbench ansys spaceclaim topology optimization topology

Planar Seal Simulation with Hyperelastic Experimental Data (Mooney-Rivlin Hyperelastic Model)

Semih Tinmaz
in FEM
44 0 Intermediate
The seal which is used in the door of applications from automotive industries. The seal is a long strip of rubber and it will be modeled as a plane strain problem. A series of material tests has been conducted, including the uni-axial tensile test, the bi-axial tensile test and the shear test. A series of trials of data fitting shows that, for these material testing data, the two-parameter "Mooney-Rivlin Hyperelastic Model" fits the data better than other models. It is decided to use Two-Parameter Mooney-Rivlin Model. The unit system used in this tutorial is "U.S. Customary (in-lbm-lbf-s)".
finite element analysis ansys workbench mooney-rivlin model planar seal test hyperelasticity

Static Crack Growth Analysis of ARCAN Specimen - ANSYS Workbench

Semih Tinmaz
in FEM
41 0 Intermediate
This tutorial includes step-by-step static crack growth analysis of ARCAN Specimen.
ansys workbench fatigue life fatigue crack fracture mechanics finite element analysis computer aided engineering spaceclaim

Introduction to Finite Element Method /CAE

Prasertsak Naksakul
in FEM
18 0 Beginner
Finite Element Method for product design and process improvement.
fluid improvement process cae analysis stress design fem

Learn Step by Step How to do Flow Simulation in SolidWorks on Cross Flow Turbine

Usman Akhtar
in CFD
18 0 Beginner
In this solidworks flow simulation tutorial you will learn how to do flow simulation on a hydro turbine, in this video I am going to do external flow simulation.
simulation flow solidworks

CFD

Vatan Gedam
in CFD
17 0 Expert
Here we are find the forces as well as pressure exerted on fan blade at the wind speed of 60kmph by using of ANSYS
flow blade pressure testing simulation wind ansys fan cfd

2. Solving 2D Problems

Ananth Narayan
in CFD
16 0 Beginner
In this tutorial we will discuss about the 2D problems which involve defining boundary condition and solving them. Iam going to create the nozzle with the air velocity inlet (ideal) and pressure outlet. Improving mesh obtain good result.
san fluent cfd ansys

Keyshot Animation Tutorial Using Simple Model Of High Bypass Turbojet Engine

Anuj Kaushal
in Process Simulation
15 2 Beginner
In this tutorial i have used keyshot software for animation purpose. I have used a 3D model of a High Bypass Turbojet Engine for denomsration. It took couple of hours to create the animation video that's why i have skipped that part from the video.
blades compressor jet turbine turbojet engine bypass high tutorial animation keyshot

Spring stiffness calculation in SOLIDWORKS

Ahmed Sakib
in FEM
14 1 Intermediate
How to calculate spring stiffness with Solidworks simulation @cadingal . Static structural analysis of a helicoil spring will be done using self contact approach to calculate spring stiffness in Solidworks.
finite element analysis fem solidworks spring stiffness calculation spring stiffness simulation

Linear Static Study in 10 simple steps.

Ilirjan Leci
in FEM
14 0 Intermediate
Linear Static Study with SolidEdge.
fea solidedge

SolidWorks Flow Simulation Tutorial with Rotating Region on Run of River Hydro Turbine

Usman Akhtar
in Simulation & CAE
14 0 Beginner
In this solidworks video tutorial you will learn how to do External Flow Simulation in solidworks with water and rotating region. About this Channel Here you will find Videos Related to 1. SolidWorks 2. Hydro Power 3. FYP Designing and Manufacturing. 4. Electrical Engineering 5. 3D Printing 6. Low RPM Alternators 7. Manufacturing of Hydro Turbines Subscribe to this channel for all updates mentioned above. SolidWorks Complete Learning Step by Step from Basics to Advanced Level: https://www.youtube.com/playlist?list=PLJR3qNZXHShwwR3BJzyv-5-Woled6n9KR Urdu / Hindi SolidWorks Learning : https://www.youtube.com/playlist?list=PLJR3qNZXHShze-ZcfiGpsMjzfLY2e9Pyk Want me to Design Project for You??? Contact Me My Facebook id: https://www.facebook.com/usman.akhtar.5 My Page link: https://www.facebook.com/solid.online.Training
simulation flow solidworks

Simulation of Two Flanges with Bolts

zaher
in FEM
13 10 Intermediate
Solidworks Simulation, Bolt connection
solidworks flanges bolt_connection simulatiom
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.