Models
Work experience
CAE Engineer
Lioho Machine Works, Taiwan
•
September 2020 - present
I worked here in the Foundry Research and Development Center of the company. My company is the casting iron manufacturing. My job is to analyse some vehicle component such as disc brake, knuckle, hub, and caliper. It consist of static analysis, thermal analysis, modal analysis, fatigue prediction, multi-body dynamic, NVH analysis, and design optimisation. I used some software like NX 12, MSC Patran, MSC Nastran, MSC March, ADAMS, Hypermesh, Hyperworks, and Abaqus. I worked there after I got master degree in Taiwan.
CAD Engineer
Yanmar Agricultural Machinery Indonesia
•
August 2017 - August 2018
I have worked at Yanmar Indonesia Company as a CAD engineer. That is Japan Agricultural Machinery Company branch in Indonesia. I joined in Research and Development Department. My job is designing the component/part of Yanmar product such as hand tractor, combine harvester, mini tiller, etc. I worked there on 2017 until 2018 (after I finished my bachelor degree)
Education
Bogor Agriculture University
Bachelor of Engineering, Mechanical and Biosystem Engineering
•
January 2013 - present
I studied about agriculture machinery design and engineering.My research here is about "Design of Soybean Vacuum Seeder Powered by Two-Wheel Tractor". That topic is the project from Indonesia Ministry of Agriculture. I used solidwork for CAD modelling.
National Central university, Taiwan
Master, Mechanical Engineering
•
January 2018 - January 2020
I studied in mechanical dynamic and vibration. My research here was about "Brake Squeal Analysis using Complex Eigenvalue Extraction". Here I used Siemens NX for modelling and meshing. For CAE I used MSC Patran as a pre-processing and MSC Nastran as a solver. I get that project from car company in Taiwan.